Double Power Technology T-708 Manual do Operador descarregar pdf (Página 32)

32 708-DS / 709-DS Operator’s Manual

3 Setting Up the 708-DS / 709-DS

Level Instrument - Re-verification

1 With the water bath filled (if applicable), re-verify the instrument

level front to back and right to left using a bubble or digital level.

Heater / Circulator Power-up (708-DS)

1 Turn on the power to the heater / circulator using the switch located

on the unit.

2 Ensure the water flow through the heater / circulator begins. To

release air trapped in the pump or heater cartridge, follow the

priming instructions located on the heater / circulator.

3 Repeat the procedure, if necessary.

4 Ensure no leaks are present at any of the tubing connections.

NOTE

Use ultrapure water when possible to minimize scale and mineral

buildup. Use algaecide to inhibit mold and bacteria and algae growth.

Check the label to ensure the formulation is compatible with the plastic

materials used in the water bath construction. The flow paths of the

heater / circulator are primarily stainless steel and should tolerate most

clear water bath formulations.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 139 140

Sem comentários

Double Power Technology T-708 Manual do Operador Página 32