Double Power Technology T-708 Manual do Operador descarregar pdf (Página 34)

34 708-DS / 709-DS Operator’s Manual

3 Setting Up the 708-DS / 709-DS

Vessel Installation

1 Press Drive to move the drive unit to the fully raised position.

2 Carefully install the dissolution vessels in the vessel plate.

3 For the 708-DS vessel, engage the clips for each position over the

rim of the vessel to secure it in place.

For the 709-DS vessel, open the clip, install the vessel, and close the

clip.

4 If necessary, place the TruAlign blank vessel position covers on the

vessel plate openings at Position 7 and Position 8. Rotate the two

clips for each position over the cover to secure it in place.

NOTE

Bubbles on the surface of the vessel, like the one centered in the figure

below, are not a manufacturing defect and will not affect performance.

Figure 11 Vessel Bubble

CAUTION

Ensure the connection pins in the vessel socket are aligned with the

holes on the vessel.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 139 140

Sem comentários

Double Power Technology T-708 Manual do Operador Página 34